Compact, thin profile construction allows for tight space installations. The patented fan blade maximizes air flow while minimizing noise. Mounting slots along the shroud’s diameter can utilize hex or square bolts, leg brackets, or nylon fastening rods. Thin-line fans are designed to work with the Fin-Cool® and Temp-Troller® Electra-Cool heat exchangers.
Part #
Fan Size (Ref)
Shroud Diameter*
Depth
Voltage
AMP Draw
HAY-025576
12
12.62
3.5
12 VDC
11.7
HAY-025001
12
12.62
3.22
24 VDC
3.0
HAY-025587
14
13.19
3.66
12 VDC
10
HAY-025003
14
13.19
3.58
24 VDC
4.6
HAY-025004
16
15.75
4.1
12 VDC
20.1
HAY-035591
16
15.75
4.1
24 VDC
8.6
Performance based on fan/motor assembly (puller) with 3" plenum (3" enclosure depth) and a one row Fin Cool® heat exchanger. *Across flats
Thermostatic Fan Controllers
Fan controllers increase motor life in either AC/DC applications where forced air is needed intermittently.
025075 parts
6” wire leads, 14 Gage
Single pole/single throw - normally open (SPST-NO) circuit
Suitable for our standard single fan Temp-Troller® Electra-Cool heat exchangers
15 Amps @ 120 VAC
10 Amps @ 240 VAC
Hysteresis: 20° F
Brass Body
Part #
Temperature Activation Setting
025375-0120
120 ±5°F
025375-0140
140 ±5°F
025375-0160
160 ±5°F
025375-0180
180 ±5°F
025090 parts
25 amp rating, up to 600 VAC
18” wire leads
Single pole/single throw - normally open (SPST-NO) circuit
Suitable for our standard single or dual fan Temp-Troller® Electra-Cool heat exchangers
Part #
Temperature Activation Setting
025090-120P
120°F
025090-140P
140°F
025090-160P
160°F
025090-180P
180°F
Tapered Rubber Block
Tapered rubber mounting block eliminates unnecessary over-torquing and allows for easier assembly. Supplied in kits K223 and K238.
Mounting Kits
Mounting kits allow heat exchanger units to be securely mounted to adjoining support structure.
K-103, K107, K107-1,
K108 & K-112,
Clamps with straps
K-183,
Channel mount
K-210, Nylon rods
K-223 & k-238,
Rubber blocks & rubber blocks with straps
